Water Spots Blog

Healthy Water, Healthy Planet

Skip to: Content | Sidebar | Footer

The Best Water Filter for Nitrate Reduction

29 April, 2015 (14:28) | Drinking Water System, Impurities Found in Drinking Water, Impurity Solutions, Reverse Osmosis, Water News | By: admin

Nitrate contamination in drinking water is widespread in the United States; the highest degree of contamination is in the Midwest, Texas, the Pacific Northwest and California. The U.S. Environmental Protection Agency (EPA) estimates that as many as 52 percent of community wells and 57 percent of domestic water wells are contaminated by a measurable amount of nitrates and nitrites. In Los Angeles and the San Joaquin Valley of California, it is estimated that one in every three domestic wells are contaminated with levels well over the EPA’s recommended guidelines.

Nitrates and Nitrites are not all bad, in fact we need them to some extent to stay healthy, however excess consumption can cause serious health risks. Infants below six months of age are especially susceptible to nitrate contamination. The EPA states that if they consume water containing nitrates in excess of the maximum contaminant level, they could become seriously ill, and if untreated, may die. Symptoms include shortness of breath and blue baby syndrome.

The only way to remove nitrates from drinking water is through a water filtration system. Many water treatment companies promote Reverse Osmosis (RO) systems as an immediate solution to provide nitrate and nitrite reduction. RO systems do in fact reduce nitrate levels, however even the best RO system can only reduce them by eighty percent. The most typical systems only have a sixty percent reduction rate. This sounds pretty good doesn’t it? Well in some cases this reduction rate is just fine, however not all water has the same level of contamination.

The EPA recommended guidelines for nitrates are a maximum 10 parts per million (ppm). Let’s say for example that your water has 30ppm nitrate contamination, a sixty percent reduction would only bring it down to 12ppm – still more than the recommended guidelines. At eighty percent reduction it would be 6ppm, which does falls within the guidelines, however there are only a select few RO’s that have an eighty percent reduction. Now let’s say your water starts at a 60ppm contamination level, even at an eighty percent reduction rate it would only bring it down to 12ppm, which is too high and can cause some health complications.

The LINX Drinking Water System is the best solution to nitrate contamination. It doesn’t matter how much nitrate contamination your water has, 200ppm or 20ppm, it still reduces it down to non-detect levels – every time. These reduction rates are far superior to a traditional RO water filtration system. This superior filtration has earned them the WQA Gold Seal for Nitrate / Nitrite Reduction as well as being certified and approved for nitrate reduction in the state of California. If your water has a problem with nitrate contamination, don’t take the risk of being exposed to excess contamination, install the one and only water filtration system that can reduce your nitrate levels to non-detect levels.

Write a comment

You need to login to post comments!